August 2, 2012

Transparent Clutch DIY

Em seguimento do meu post de há uns uns tempos atrás sobre carteiras transparentes, que podem ver aqui, hoje deixo-vos aqui mais um DIY do blog "a pair and a spare".
Este blog está repleto de inspiração para quem gosta de DIY, eu confesso que sou um pouco preguiçosa, mas sem dúvida que algumas das suas ideias me deixam com imensa vontade de pegar numa tesoura, tecido... e começar a trabalhar. E esta foi uma delas.
Espero que gostem.


In a follow up of my post from June about transparent bags, that you can see here, today I share with you another amazing DIY from the blog "a pair and a spare".
This blog is full of inspiration for those of you who love DIY's, I have to say I'm a little lazy, but there's no doubt some of the ideas in there make me want to pick up a pair of scissors, fabric... and get to work. And this is one of them.
I hope you like it.







How to do it?

You need:
- A big rectangle of clear PVC. Mine was around 3mm thick
- 5 round top studs with screws
- A pen
- Scissors
- Multi hole punch
- A ruler
- An A1 piece of white paper or cardboard


1. Draw the template onto your paper - following the measurements you see below. Click here for a bigger
    version. Note that the image itself is indicative and not to scale. The measurements are approximate
    because I think you can make it a little bigger or smaller or give it a different shape if you want, it's just
    about trimming it to suit you, but this template will give you the general structure.



2. Cut your template out and then use some tape to stick it on your pvc.

3. Cut your pvc, using the template as a guide.

4. Remove the template from the pvc.

5. Fold the corners over like an envelope, folding the sides in first, then the bottom, and then lastly the top
    flap.

6. Decide where you want to put your stud beads to secure the envelope shape. I have put little coloured 
    circles on the template to give you an idea of where the holes should go for the studs. Use the hole 
    puncher to make holes relative to the size of the screw in the stud bead. 
                                 

7. Push the screw through from the underneath and then screw the top on

8. For the lower holes, make the top hole first and then mark with a pen the inside hole. Open up the bag to
    make the inside hole.

9. Once all the holes are done - close the bag to work out where to put the stud that will act as a latch.

10. Mark with a pen and then use the hole punch to put a hole in the underside of the opening. Thread the stud bead through the single underneath layer, and then put another hole in the flap to be used to secure the opening by pushing the hole over the stud.


Now you just have to put what you want inside!
Agora é só pôr o que quiserem dentro!




All photos and explanation from http://apair-andaspare.blogspot.ca
Todas as fotos e explicação retirados de http://apair-andaspare.blogspot.ca


24 comments:

  1. Já tinha visto essa ideia num outro blog e gostei muito do rsultado! Mas eu não tenho jeitinho nenhum :s

    ReplyDelete
  2. É uma excelente ideia :)

    ReplyDelete
  3. olha que ideia tao original... mas não te estou a ver a fazer isto :P
    Biju

    ReplyDelete
  4. WOW great!

    www.modelovers.com
    www.modelovers.com
    www.modelovers.com

    ReplyDelete
  5. Mas que bela ideia, ficou super gira :)

    Beijinho*

    ReplyDelete
  6. vou tentar!!!
    Beijinho

    -------
    Giveaway Geleia Real de Cereja---> http://thepinkleatherjacket.blogspot.pt/2012/08/giveaway-geleia-real-de-cereja.html

    Giveaway Top Purple Fashion-----> http://thepinkleatherjacket.blogspot.pt/2012/08/giveaway-top-purple-fashion.html

    ReplyDelete
  7. Eu sou um pouco preguiçosa também pra fazer DIYs mas, de qualquer forma, adoro ver os outros fazendo! Sempre bom ter essas ideias pra quando a preguiça for embora, né?

    xx

    ReplyDelete
  8. eu já tinha dado com essa DIY e adorei! é super gira. mas o trabalho :\

    ReplyDelete
  9. I really like the look of this, but I doubt that people would want to see everything that is in my bag.

    http://www.glamkittenslitterbox.com/
    Twitter: @GlamKitten88

    ReplyDelete
  10. What a stunning DIY idea, love the material and the simplicity of the clutch!

    Virginie/
    http://www.virginiepeny.com

    ReplyDelete
  11. Obrigada querida <3
    Adorei o DIY, a mala é linda :D

    ReplyDelete
  12. Amazing selection. I loved what you did and made this gorgeous bag!!!
    Thanks so so much for visiting a leaving a lovely comment on my blog.
    Sending you kisses and hugs.
    Miss Margaret Cruzemark
    http://margaretcruzemark.blogspot.com/

    ReplyDelete
  13. ADOREI! Estou mesmo a pensar fazer... muito muito bom post :) Espero que estejas a ter umas férias fantásticas!
    Beijinho grande <3
    http://goncalosubtil.blogspot.com

    ReplyDelete
  14. AMEIIII!!! que pena que não tenho abilidades!! hauahuah
    Aguardo você no meu blog, http://larissacanziani.blogspot.com.br/

    ReplyDelete
  15. Quem diria que podia ser assim tão simples. Adorei!

    ReplyDelete
  16. I love transparent clutch!


    Théa Unknown
    http://theaisunknown.blogspot.fr/

    ReplyDelete
  17. por acaso ja fiz uns quantos e ate resultaram bem, este será o próximo! só estou á espera de arranjar o material todo! :)

    ReplyDelete
  18. adorei, acho que vou por mãos a obra!!!

    ReplyDelete
  19. Adorei ! Obrigada pelo tutorial ! :D

    xo ,
    Ana Catalarrana
    http://Sinbowtie.blogspot.com

    ReplyDelete

Really glad to read your thoughts!

LinkWithin

Related Posts Plugin for WordPress, Blogger...